MICRO-EPSILON thermoMETER CT Series - 12.1 Serial Interface; 12.2 Protocol

Page 79
Communication Settings
thermoMETER CT
12. Communication Settings
12.1 Serial Interface
Baud rate: 9.6 ... 115.2 kBaud (adjustable on the unit or via CompactConnect software)
Data bits: 8
Parity: none
Stop bits: 1
Flow control: off
12.2 Protocol
All sensors of the CT series are using a binary protocol. They can be switched alternatively to an ASCII proto-
col. To get a fast communication the protocol has no additional overhead with CR, LR or ACK bytes.