Name: MICRO-EPSILON thermoMETER CT Series
Brand: MICRO-EPSILON
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Page 45

Outputs and Inputs

thermoMETER CT

8.2.3.2 Sensor Installation

Each CT unit connected to the RS485 needs a different multidrop address (1 ... 32).

Please adjust the address by pressing the button until M xx appears in the display.

Using the Up and Down keys you can change the shown address (xx) The address can also be changed

with the CompactConnect software. The baud rate setting in the CompactConnect software must be the

same as on the CT unit (factory default: 9.6 kBaud.)

Please install the CompactConnect software, see 11.

Please connect the RS485 USB adapter (TM-RS485USBK-CT) via the supplied USB cable with your PC.

After it has been connected the computer will recognize a new USB device and (if connected the first time)

will ask for installation of the according driver software.

Please select Search and install the RS485 adapter USB driver from the CompactConnect software CD.

Questions and Answers:

Need help?

Do you have a question about the MICRO-EPSILON thermoMETER CT Series and is the answer not in the manual?

MICRO-EPSILON thermoMETER CT Series Specifications

General