Page 9
Safety
thermoMETER CT
1.4 Intended Use
- The thermoMETER CT is designed for use in industrial and laboratory areas. It is used for non-contact
temperature measurement.
- The system must only be operated within the limits specified in the technical data, see 3.
- The sensor must be used in such a way that no persons are endangered or machines and other material
goods are damaged in the event of malfunction or total failure of the controller.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5 Proper Environment
- Protection class:
Sensor: IP 65 (NEMA 4)
Controller: IP 65 (NEMA 4)
- Ambient temperature:
- Sensor: See also Chapter Measurement Specification, see 3.5
Controller: 0 ... +85 °C (+32 ... +185 °F)
Avoid abrupt changes of the ambient temperature of both the sensor and the controller.
> Inaccurate measuring values
- Storage temperature:
Sensor: See also Chapter Measurement Specification, see 3.5
Controller: -40 ... +85 °C (-40 ... +185 °F)
- Humidity: 10 ... 95 %, non-condensing
To Next Page
Loading...
