MICRO-EPSILON thermoMETER CT Series - Appendix: Settings and Data; A 2 Factory Settings

Page 102
Appendix | Factory Settings
thermoMETER CT
A 2 Factory Settings
The devices have following presettings at time of delivery:
Signal output object temperature 0 - 5 V
Emissivity 0.970 (CTP-3, CTP-7)/1.000 (CTM-1, CTM-2, CTM-3)
Transmissivity 1.000
Averaging (AVG) 0.2 s (CTF: 0.1 s)/(CTM-1, CTM-2, CTM-3: 0.001 s)
Smart Averaging inactive/(CTF, CTM-1, CTM-2, CTM-3: active)
Peak hold (MAX) inactive
Valley hold (MIN) inactive
Lower limit signal output 0 V
Upper limit signal output 5 V
Temperature unit °C
Ambient temperature compensation
1
internal sensor temperature probe
Baud rate [kBaud] 115
1) Output at OUT-AMB as 0 - 5 V signal on CT-SF and CTP-7