MICRO-EPSILON thermoMETER CT Series - 9.4 Error Messages

Page 76
Operating
thermoMETER CT
9.4 Error Messages
The display of the thermoMETER CT can show the following error messages:
9.4.1 CT-SF02, CT-SF15, CT-SF22, CTH and CTP Models
OVER Object temperature too high
UNDER Object temperature too low
^^^CH Sensor temperature to high
vvvCH Sensor temperature to low
9.4.2 CTM-1, CTM-2, CTM-3 Models
1. Digit
0x No error
1x Sensor temperature probe short circuit GND
2x Box temperature too low
4x Box temperature too high
6x Box temperature probe disconnected
8x Box temperature probe short circuit to GND
2. Digit
x0 No error
x2 Object temperature too high
x4 Sensor temperature too low
x8 Sensor temperature too high
xC Sensor temperature probe disconnected