MICRO-EPSILON thermoMETER CT Series - Rail Mount Adapter for Controller; A 1.4.3 Tilt Assembly for CT Sensors

Page 96
Appendix | Accessories
thermoMETER CT
A 1.4.2 Rail Mount Adapter for Controller
With rail mount adapter the CT controller can be mounted easily on a DIN rail (TS35) according to EN50022.
Fig. 44 Rail mount adapter for controller [TM-RAIL-CT]
A 1.4.3 Tilt Assembly for CT Sensors
With this mounting accessory a fine adjustment of the CT sensor with an off-axis angle ±6,5 ° is possible.
Fig. 45 Tilt assembly [TM-TAS-CT]