Page 49
Outputs and Inputs
thermoMETER CT
Factory settings address and baud rate
CAN open service „LSS / Layer Setting Services“
Index temperature value:
The temperature information is located in the object register 7130h (Sub01):
e.g. B4: LB
B4: DA
B5: HB
B5: 07 T = 20.10 °C
Before delivery, MICRO-EPSILON can set parameters, desired by the customer, for an extra charge. For the
subsequent conversion a CAN master is required.
Diagnosis
If the power supply is on, the LED displays one of the following conditions:
State Meaning
Flashes quickly
Device is in preoperational
mode.
Off Power supply is not correct / faulty hardware.
Illuminates Device is in operational mode.
Sparkles Device is stopped. = Communication stopped.
To Next Page
Loading...
