Miditemp MP 22-W - Chapter II - Basic Operation Chapter II - Basic Operation; Setting up a System; Remote Controller

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
10
Chapter II - Basic operation
Setting up a system
You centainly may connect more than the above shown number of Midi-inputs, e.g. a second
keyboard, a midified accordeon, a breath controller (via your keyboard). Please notice the Midi-
output-chain should not serve more than three devices – otherwise you could catch a Midi dealy!
Remote controller
Every MIDITEMP system is controlled via the unique cable remote controller. Please connect
it with the delivered cable between the REMOTE SLOTS of the system and the remote controller.
The start/stop/continue sequencer functions, or the up/down matrix functions, can be
controlled via an optional foot switch. More examples you will find in the section
»
JOBS
«
(page 73).
Owner of an MP88 with 1
st
generation remote controller: in case of problems please contact
the MIDITEMP technical support.
You can use the W-series remote controller as well for the “old“ systems, of course.
MIDITEMP supplies the needed adapter.
New functions, like
»
AUDIO
«
can only reached with the W-series system and are without a
function with “older“ systems.
Vocalist
VocalistVocalist
Vocalist
lightcontroller
lightcontrollerlightcontroller
lightcontroller
Expander 3
Expander 3Expander 3
Expander 3
Expander 2
Expander 2Expander 2
Expander 2
Expander 1
Expander 1Expander 1
Expander 1
Guitar Effect
Guitar EffectGuitar Effect
Guitar Effect
Guitar Preamp
Guitar PreampGuitar Preamp
Guitar Preamp
Effect 2
Effect 2Effect 2
Effect 2
Effect 1
Effect 1Effect 1
Effect 1