Miditemp MP 22-W - Configuration Menu (CNF)

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
84
When receiving the unit should be on the highest function level. If you get the error message
“
System Buffer full
“ during the transmission of a Bank, you have first to delete all Programs
before you start the transmission once again. As an alternative you may try to send the data with
lower speed.
With the function “
EVD
“ you can swith off the evaluation of the Matrix SysEx data. In this way
these data can be routed to other devices or recorded with the “Record“ function of the
MULTIPLAYER like all other MIDI data.
The function “
CHK
“ allows the reception of Program Banks that are sent with Operation
System version 1.XX (the calculation method of the checksum has been changed in the 2.00 release).
With each power-up the settings of “
EVD
“ and “
CHK
“ will be set to the default “
enabled
“.
1.8 Configuration menu (CNF)
This function is identical with the result of a double-click on or .