Miditemp MP 22-W - Load a Song; Loading a Song During Playback; Like a CD Player

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
48
➊
Select a Bank using the number keys. The display immediately returns to the top level.
➋
Select a Song memory place using
!
, or the numeric keys to , and press
to activate it. The arrow in front of the “S“ turns to black.
&
To create a new Bank press one of the number keys above which there is no Bank number.
After a dialog window has been answered with “YES“ a new Bank will be created. The Song
number flashes, and can be selected via
!
, the numeric keys to and .
1.3 Load a Song
See Chapter “9.2 Load songs, matrix programs, waves (LOA;LDB;LOA)“, page 20. If you
load a song on a Song memory place while there is already one entrance, the “old“ song will be
replaced. The Assign will automatically be actualized.
CAUTION: All settings of the Performance mode are settings on the memory place, and still
active on the new song!
1.3.1 Loading a Song during playback
1.3.1 Loading a Song during playback1.3.1 Loading a Song during playback
1.3.1 Loading a Song during playback
You can load individual Songs into memory (into Program memories without Assignment)
even while a Song is playing back:
➊
Select a Song memory place using
!
, or the numeric keys to , into which the
song will be loaded. In this case though, please do not press press
yet.
➋
Double click on
.
➌
Find the required song using
!
and press . When the song has finished
loading, the display will return to the song currently playing.
&
This function allows to load songs on the spur of the moment if they are not in the current
Assignment (such as songs on a floppy disk, with a different Assign file ...)
1.4 Like a CD player ...
A song can be started or stopped by hand using the keys and , or using the
footswitch(es). You can step (not during a playback of a song) to the previous or to the next song in
an Assign using the keys
and . In this case the song will be selected and immediately
be loaded to get active. You can break the playback of a song using
. In short – the Sequencer
can be handled like a CD-player.