Miditemp MP 22-W - Installing a New Matrix Bank; Selecting an Existing Matrix Bank; Copying a Matrix Program (COP)

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
82
1.2 Installing a new Matrix bank
$
Select
and press . The Bank Select menu appears and the LED for the active
Bank lights up. Banks 1 to 8 are assigned to the number keys (1 to 8). The current Group
is shown in the top right of the display (e.g. “
G=1“
).
➊
Use
!
to display the next row of eight (9 to 16, 17 to 24 etc.). Keep an eye on the Group
display in the top right (G=2, G=3 etc.).
➋
If you press one of the number keys which is not illuminated you will be asked whether the
relevant Bank should be installed (or “created“).
➌
Pressing “
yes
“ will install the Bank, the display will return to normal mode, and the arrow
will indicate the new Bank.
➍
Using
!
, choose a Program number and press . A Matrix program has now been
selected, and is ready for editing.
1.3 Selecting an existing Matrix bank
$
Select
.
$
press
. The Bank select menu appears and the LED for the active Bank lights up.
Banks 1 to 8 are assigned to the number keys
to . The current Group is shown
in the top right of the display (e.g. G=1).
➊
Use
!
to display the next row of eight (9 to 16, 17 to 24 etc.). Keep an eye on the Group
display in the top right (G=2, G=3 etc.).
➋
Press
to to select an existing Bank (illuminated number key).
➌
After a number key is pressed the display returns immediately to the highest level.
➍
Using
!
, choose a Program number and press . A Matrix program has now been
selected, and is ready for editing.
1.4 Copying a Matrix program (COP)
➊
Using
!
in normal mode, find a Program memory into which you wish to copy another
Matrix program, and press .
➋
Call up
»
"
« and select
»
COP
«
.
➌
If the Program you wish to copy is in a different Bank, press
once, choose the Bank
and press
.
➍
Using
!
, choose the Program you wish to copy, and press .
No.: 1 2 3 4 5 6 7 8 G=1
Name:M1A
Copy:
➨
➨➨
➨
M1A 1 to:M1A 1