Miditemp MP 22-W - Channel Events

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
8
9
*
All notes (a range of or individual notes)
*
Program Change
*
Pitch Bend
*
Aftertouch (Poly/Channel Pressure)
*
Individual controllers 1 ... 127
*
All controllers
*
System Exclusive messages
*
System Common messages (Song Pointer, Tune, EOX)
*
Real Time
*
Active Sensing
&
You can look up the controller numbers (1-127) in Appendix E.
$
Call up the Filter function:
»
FLT
«
.
In the top right of the display you will see the number and name of the current MIDI input.
➊
Press
or and select an input or output using to .
➋
Using
!
, choose the event type.
➌
Press
to switch the Event Filter on or off
(“
filter is
➧
off
“ / “
filter is
➧
on
“).
&
Filter settings, like all the other functions, act on the playback of Songs as well as on the
Matrix.
6.2.1 Channel events
6.2.1 Channel events6.2.1 Channel events
6.2.1 Channel events
As soon as you have selected one of the following filter types
*
Notes
*
Note Events
*
Poly Pressure
*
Contrl. 0 ... 127
*
Program Change
*
Channel Pressure
*
Pitch Bend
*
Control No. #
“
omni
“ appears at the top right of the display.
➍
Press
, until the flashing cursor is over the word “
omni
“.
➎
If you now use
!
you can specify a MIDI channel for which this particular filter will be
active.
Filter: 1:

1

2 3 4 5 6 7 8