Miditemp MP 22-W - Display; Selecting Programs; Numbering Your Songs

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
12
2. Display
The LCD display always shows where you are in the device, or, with the cursor position,
which parameter can be changed at that moment. Immediately after powering-up the unit is on the
highest operational level (= top level), and the display (default) is divided into an upper “Matrix” line
with one shown Matrix Bank and a lower “Sequencer” line showing the song Bank.
However, the “Display Layout” configuration function allows a different division to be used (page
28). You may also notice the „Night mode“ (page 39). The position of the mode arrow indicates
which mode the unit is in at any time.
3. Selecting Programs
$
Press or , depending on whether you want to switch to a Matrix or Song Program.
The arrow jumps to the corresponding display line.
➊
Enter a Program number using the number keys.
Number and name (if any) of the Program are now displayed, but as long as the arrow to the
left of the display is hollow and the cursor blinks right to the number the Program is not yet
recalled! You can also use
!
to search for the new Program, while the settings of the last
recalled Program are still active.
$
Press . Through this action the new entry will be confirmed, and the new program is
activated.
The blinking cursor disappears and the arrow turns to black. This means that the unit has switched to
the displayed program and all settings of that program are now active.
4. Numbering your Songs
There are three different types of numbering your playlist of Standard Midi Files:
•
Standard Bank/Programm mode
•
3-digit-mode
•
4-digit-mode
'
''
'
M1A 1
S1A 1
(
((
(
M1A123
)
))
)
Dancefloor
S1A 1
'
''
'
M1A123 Dancefloor
S1A 1