Miditemp MP 22-W - Deleting Matrix Programs (DEL); Name a Matrix Program (NAM); Dump Functions (DMP)

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
8
3
1.5 Deleting Matrix programs (DEL)
➊
Using
!
select the Program which is to be deleted and press .
➋
Call up
»
"
« and select
»
DEL
«
.
You can choose between:
*
not
➩
do not delete
*
one
➩
delete only the selected Program
*
all
➩
delete all Programs in a Bank.
➌
Choosing “
one
“ will activate the Delete function immediately, the selection “
all
“ displays
a warning message.
%
Pressing
will abort the function.
1.6 Name a Matrix program (NAM)
➊
Call up
»
"
« and select
»
NAM
«
.
➋
Give a name (see Section7 “General rules of naming“, page 17).
1.7 Dump functions (DMP)
➊
Call up
»
"
« and select
»
DMP
«
.
At the top right you will see the Bank number and type.
➔
Choose between:
*
BNK
➩
Select Bank
*
TXB
➩
Transmit Bank – a whole Bank can be sent
*
TXN
➩
Transmit Names – the MIDI port names can be sent
*
BLK
➩
Bulk Dump – all Banks, Programs and names can be sent
*
EVD
➩
Enable/Disable Dump evaluation
*
CHK
➩
Enable/Disable Checksum evaluation
*
?
➩
Display current Bank
➊
Using
!
and you can select the Bank to or from which data is to be sent.
➋
When sending SysEx data (“TXB“, “TXN“ and “BLK“) you need only select the MIDI output
via which the data is to be sent.
Delete Program M1A 1
TMR ? not one all
Name of Program M1A 1 no name
Spc 1 A a ins del
Tx
/
Rx Dump Bank:01 M1A
TMR BNK TXB TXN BLK EVD CHK ?