Miditemp MP 22-W - Copy File (COP)

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
22
9.4 Copy file (COP)
The MIDITEMP MULTIPLAYER works with an universal storage system. You can store and
copy even files the MP cannot read (e.g. textfiles, pictures ... you want to carry that way to your home
computer). So the copy-function is one of the general utilities for all modes:
$
Press
to reach the drive functions menu:
➊
Call up the function with
»COP«.
It follows the (really fast dissapearing) message:
and the current path appears.
➋
Open the folder or directory, into which you want to copy one or more files, so that the
folder name (see page 23) appears in the upper line in the display. With
you can
open a folder, with
you can leave the folder, with
you can change the drive.
➌
Press
.
It follows the (really fast dissapearing) message:
The MP will remeber the path you’ve just selected (even if you want to copy much
later in that session!).
➍
Using
, , , and
!
, find the files on that drive you want to copy in the
previously specified folder:
☞
On each single file to be copied press . Each press will immediately copy the
currently displayed file to the selected device position.
☞
Press
»ALL«
to copy all following files in alphabetical order of the currently
selected folder into the selected file.
%
With
you leave the function. (Using the “ALL“-mode the MP automatically returns to
the main display!)
&
The display shows the current position with the name of the file. The MULTIPLAYER copies
files in alphabetical order from the current file (included) displayed before pressing the
.
With this method you’re able to copy only parts of a folder (e.g. if the space isn’t big enough
on the selected backup drive).
Copy stops if a storage device is full with the message "Disk full". Change the medium and
start the copy function again – the MP displays the last (not copied) file so you can remain the
copy routine just by pressing
»
ALL
«!
<DRIVE> Select function:
TMR LOA SAV LDA COP ERA DIR CD
#
##
#
Copy Files - select destination dir:
Select Files to copy:
B:
\
*.*
SONG.MID 46k [copy] ALL