Miditemp MP 22-W - Load Songs, Matrix Programs, Waves (LOA; LDB; LOA)

MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
20
9.2 Load Songs, Matrix programs, Waves (LOA; LDB; LOA)
$
To load a song select the place (program number) you want to load the song in and
confirm with
. Then press
and
to get the drive functions menu:
➊
With
»
LOA
« and the data wheel
!
you can select your Song file.
The upper line in this example shows you are on drive B, root position, and are ready to
load a Midifile ( \*.MID ). The lower line indicates the name of the Midifile, the size and the
free space on the internal RAM memory.
➋
If you want to change the drive now just press
and select the drive.
➌
If you see the name of the song in the lower line confirm with
.
%
With
you leave the function.
In the Matrix mode the work is similar:
In the Matrix mode the work is similar:In the Matrix mode the work is similar:
In the Matrix mode the work is similar:
$
To load a Matrix bank select with and the bank you want to load the datas in.
➊
With
, »
LDB
« and the data wheel
!
you can select your Matrix file.
➋
If you want to change the drive now just press
and select the drive.
➌
If you see the wanted Matrix file in the lower line confirm with
.
%
With
you leave the function.
In the Wave mode the work is similar:
In the Wave mode the work is similar:In the Wave mode the work is similar:
In the Wave mode the work is similar:
$
To load a Wave select with
,
and
!
the place you want to load the datas in.
Press
to get the wave disk functions. To get a Wave with another extension (e.g. AIF)
just change the file-extension by pressing .
➊
With
»
LOA
« and the data wheel
!
you can select your file.
➋
If you want to change the drive now just press
and select the drive.
➌
If you see the wanted Audio file in the lower line confirm with
.
%
With
you leave the function.
<DRIVE> Select function:
TMR LOA SAV LDA COP ERA DIR CD
#
##
#
B:
\
*.MID
JINGLE1.MID 2k [load] 14737k
B:
\
*.M88
MATRIX.M88 2k [load] 14737k
B:
\
*.WAV
BEATE.WAV 2112k [load] 14737k