MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
17
7. General rules of naming
During the work it turned out to store the results in intervals because some of them could get
lost if the power shuts down (... maybe in a break down of the current supply). Therefore you find
some different types of storing. But all of them have the method of naming in common:
At the end of a storage operation you find in the lower line of the display the name suggestion of the
MIDITEMP (e.g. assign.asg, noname.mid, matrix.m88 ...).
$
press
to get the cursor
➊
select by using the soft keys the character class (spc, 1, A, a, ins and del) and insert the
sign at the current cursor position – or erase the sign at the cursor position:
☞
=>
space
☞
=>
numbers
☞
=>
capital letter
☞
=>
small letter
☞
=>
insert
☞
=>
delete
➋
After slecting the character class with the soft keys you choose the needed
sign by the
!
data wheel.
➌
press
to jump one position further.
➍
press
to close the storage.
%
press
to leave.
This procedure of naming not only works in the storage functions but everywhere you have to give
This procedure of naming not only works in the storage functions but everywhere you have to giveThis procedure of naming not only works in the storage functions but everywhere you have to give
This procedure of naming not only works in the storage functions but everywhere you have to give
names (e.g. “naming midi ins and outs“, page 28).
names (e.g. “naming midi ins and outs“, page 28).names (e.g. “naming midi ins and outs“, page 28).
names (e.g. “naming midi ins and outs“, page 28).
Working with storage functions normally the MIDITEMP shows the right extension for that menu you
are in. Press
to refresh the display or to show all file extensions (very useful after changing a
removable storage device like a disk without leaving the menu.)
&
In the storage functions pressing
doesn’t produce an “a“ but a “_“ or
a “ “ because filenames with small letters are not allowed!
To navigate in the file system you can use two keys:
Using
Using Using
Using
you open folders or move one structure level deeper.
you open folders or move one structure level deeper.you open folders or move one structure level deeper.
you open folders or move one structure level deeper.
Using
UsingUsing
Using
you close folders or move one structure level higher.
you close folders or move one structure level higher.you close folders or move one structure level higher.
you close folders or move one structure level higher.
nonam
_
spc 1 A a ins del