MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-XMIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
MIDITEMP MP 22-W, MP 22-CD, MP 88-W, MP 88-CD, PMM 88-E, MT 16-X
113
Automatic Assignment loading on power-up doesn’t work.
Automatic Assignment loading on power-up doesn’t work.Automatic Assignment loading on power-up doesn’t work.
Automatic Assignment loading on power-up doesn’t work.
Problem:
Problem:Problem:
Problem:
The Assign file on the current drive is not called ASSIGN.ASG.
Explanation:
Explanation:Explanation:
Explanation:
On power-up, the automatic load function scans the current drive for an Assignment called
“ASSIGN.ASG”, and if it finds one, it will load it. “.ASG” files with other names are ignored.
Solution:
Solution:Solution:
Solution:
Rename your start-up Assignment “ASSIGN.ASG” (naturally, you can have a different file with this
name on each of your disks if you want to, so you are not limited to only one Assign file).
The message “WRONG DISK FORMAT” appears.
The message “WRONG DISK FORMAT” appears.The message “WRONG DISK FORMAT” appears.
The message “WRONG DISK FORMAT” appears.
Problem:
Problem:Problem:
Problem:
The disk cannot be read.
Explanation:
Explanation:Explanation:
Explanation:
The message indicates a disk which is either unformatted or in the wrong format. The MULTIPLAYER
cannot read Macintosh disks or compressed formats (no 10 or 11 sector per track or 83 track disks
please!).
Solution:
Solution:Solution:
Solution:
Use only double-sided 720 kByte DD or 1.44 MByte HD disks. Use them only if they are marked
“DD” (Double Density) or “HD” (High Density).
The MULTIPLAYER won't load a song (or chooses the wrong drive).
The MULTIPLAYER won't load a song (or chooses the wrong drive).The MULTIPLAYER won't load a song (or chooses the wrong drive).
The MULTIPLAYER won't load a song (or chooses the wrong drive).
Problem:
Problem:Problem:
Problem:
The MultiPlayer can’t find the song, the Assignment shows the wrong path.
Explanation:
Explanation:Explanation:
Explanation:
The wrong path has been saved in the Assignment (see section 1.3 on page 48, “Load a Song”).
Solution:
Solution:Solution:
Solution:
Choose the “Assign to file” function or manually load the desired song. This will update the
Assignment. Then save the correct Assignment.
The MULTIPLAYER does not start up.
The MULTIPLAYER does not start up.The MULTIPLAYER does not start up.
The MULTIPLAYER does not start up.
Problem:
Problem:Problem:
Problem:
The operating system cannot be loaded.
Explanation 1:
Explanation 1:Explanation 1:
Explanation 1:
For some mystic reason (e.g. like unstable mains voltage or voltage peaks) the data in memory are
messed up.
Solution 1:
Solution 1:Solution 1:
Solution 1:
Keep pressed while switching on the unit. The entire memory will be initilized (corresponds to
the Configuration function “INI”, page 30).
Explanation 2:
Explanation 2:Explanation 2:
Explanation 2:
You did an SCSI connection without switching the device on. The SCSI chain doesn’t work.
Solution 2:
Solution 2:Solution 2:
Solution 2:
Switch on the MULTIPLAYER after powering up all SCSI devices. Control your SCSI-termination!
To Next Page
Loading...