Guide to the appliance
11
LEDs in buttons
Light-emitting diodes are incorporated in the buttons. They indicate the status of the dish-
washer.
Button LED Display Status
Display
(Reaction to
On/
Offbutton)
ON The dishwasher is switched on.
OFF The dishwasher is switched off.
Start/Stop
button
Pulsing OFF The dishwasher is in standby mode.
ON A programme has been selected but not
yet started.
ON A message has appeared on the display.
Flashes red A fault has occurred (see the fault mes-
sage on the display and the “Problem solv-
ing guide”).
ON A programme is running.
OFF A programme has finished.
To Next Page
Loading...
