Miele PFD 400 - Date, Time, and Water Hardness Settings

Commissioning
22
Setting the date

Set date


2022
OK
 Use the and arrow buttons to set the
year.

Set date
 
 
12 06
OK
 Use the and arrow buttons to set the
day and the month.
 Press OK to save the setting.
Setting the time of day
The time of day is set in the set time of day
format.

Time of day
 
 
12 : 15
OK
 Use the (higher) and(lower)arrow
buttons to set the time of day and confirm
your selection by pressing OK.
Setting the water hardness
Your local water authority can give you in-
formation about the exact water hardness in
your area.
With varying water hardness, always set the
highest level. If the water hardness fluctu-
ates between, for instance, 1.4 and
3.1mmol/l (8 and 17°dH), the water hard-
ness must be set to 3.1mmol/l (17°dH).
The water hardness setting values can be
found in the chart in “Filling the salt con-
tainer”.

Water
hardness
OK- +
°dH
14
 Set the water hardness level by tapping
the -symbol (lower) and +symbol
(higher).
 Press OK to save the setting.
In the event of a fault, it will help the service
technician if you know the hardness of your
local water supply. Document the water
hardness in “Filling the salt container”.