Miele PFD 400 - Deactivating Dispensing from the Canister; Dispensing Concentration; Filling Dispensing Paths; Rinsing Dispensing Paths

Further settings
66
Deactivating dispensing from the canis-
ter
You can subsequently switch dispensing
from the canisters to the door dispensers or
deactivate it completely.
 Start by selecting a dispensing system.
This selection is only available if the cor-
responding dispensing system is present
(depending on the model).
Clean. agent canister
Rinse aid canister
Deactivate
“cleaning agent canister”?
Yes No
Deactivate
“rinse aid canister”?
NoYes
 Select OK to deactivate dispensing from
the canister. This change will take place
immediately.
 If you do not want to change the setting,
press the button.
Dispensing concentration
The dispensing concentration for liquid pro-
cess chemicals is set in the same way for all
dispensing systems. The setting applies to
all programmes.
This selection is only available if the cor-
responding dispensing system is present
(depending on the model).
Rinse aid door
Clean. agent canister
Rinse aid canister
 Start by selecting a dispensing system.
Dispensing
concentr.
0,3 %
- + OK

 Set the dispensing concentration by tap-
ping the -symbol (lower) and +symbol
(higher).
 Press OK to save the setting.
Filling dispensing paths
See Machine functions
Rinsing dispensing paths
See Machine functions