EasyManua.ls Logo

Miele PFD 400 - Tips for the Super Short Programme (Depending on the Model); Refill Indicator

Miele PFD 400
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning agent and rinsing agent
32
Tips for the Super Shortprogramme (de-
pending on the model)
With the Super Short programme, the final
rinse water is not pumped away at the end
of the programme in order to achieve short
programme running times in continuous
use.
Cleaning agent cannot be rinsed out of the
dispenser during the short programme time.
If liquid cleaning agent dispensing is not
being used, add powder cleaning agent
directly onto the inside of the door.
To avoid corrosion or discolouration, start
the wash programme immediately after
dispensing cleaning agent directly onto
the inside of the door.
Liquid cleaning agent is dispensed from an
external canister via a suction lance.
Depending on the model, liquid cleaning
agent is dispensed either via an internal dis-
pensing pump or via an external dispensing
module. Dispensing modules are connected
by the Miele Customer Service Department
and can be retrofitted at any time.
Refill indicator
When the fill level in the cleaning agent can-
ister is low, you are reminded to change the
canister.
Change cleaning
agent canister.
Empty status
detected.
Information
OK
Confirm the prompt with OK and change
the cleaning agent canister.
Fill the dispensing path (see “Machine
functions”)

Table of Contents

Other manuals for Miele PFD 400

Related product manuals