Miele PFD 400 - Cycle Notifications and Memory

Further settings
67
Cycles until empty
This function is only available on machines
with fill level detection (depending on the
model).
When dispensing liquid process chemicals
from external canisters, the fill level in the
canister is monitored. You can use the fol-
lowing function to set the number of pro-
gramme sequences (cycles) from which you
want to be warned about the imminently
empty canisters. The message is displayed
after switching on the machine and before
every programme start.
You can set the number of cycles from 0–
150cycles; at 0, a notification is only issued
when the canisters are empty.

Cycles until
empty
OK- +
Cycles until empty
30
 Set the number of cycles by tapping the -
symbol (lower) and +symbol (higher).
 Press OK to save the setting.
Water hardness
The water hardness setting is described in
“Filling the salt container”.
Reactivation notification
In order to plan wash phases more effect-
ively, you can have the remaining number of
wash cycles before the next reactivation
displayed as a notification.
When the set number of cycles before the
next reactivation has been reached, a noti-
fication is displayed after each completed
programme.
You can set the number of cycles from 0–20
cycles; at 0, no notification is displayed.
The menu is saved under the following input
path.
Further choices
Extended settings
Cycles bef. reactivation

Note
reactivation
OK- +
1
Zyk.
 Set the number of cycles by tapping the -
symbol (lower) and +symbol (higher).
 Press OK to save the setting.