Miele PFD 400 - Programme Sequence Display

Operation
44
 Use the and arrow buttons to set the
time and confirm your selection by press-
ing OK.
Current time
Finish at
Start at
OK
09:32
12:30
--:--
 A summary follows, which you must con-
firm by pressing OK.

Start at
Universal

12:30
This activates the timer.
Changing the timer
 If you want to change the time set for the
timer, first press the button to return to
the programme view.
 Tap the symbol. You can then enter a
new start or finish time.
Deleting the timer
 Press the Start/Stopbutton.
Start programme
immediately
Delete timer
You can either delete the timer setting (De-
lete timer) or delete the timer and start the
programme immediately (Start programme
immediately).
Alternatively, you can tap the symbol
again in the programme view and delete the
timer via the settings that follow.
Programme sequence display
Once a programme has started, the display
shows the programme name, the name of
the current wash phase and the time left un-
til the programme is finished.
Universal
1:14
h

Time left
Pre-wash 1

Programme parameters such as the actual
and target temperature can be queried dur-
ing a programme sequence.
 Tap the symbol.