Cleaning agent and rinsing agent
34
Filling the door dispenser
Never add cleaning agent.
This will always destroy the rinsing agent
container!
Only fill the rinsing agent container with
rinsing agent for commercial dishwash-
ers.
Open the door fully.
Unscrew the yellow lid with
the symbol in the direction of the ar-
row.
The container holds approx. 300ml.
Only add rinsing agent as far as the
“max.” mark on the edge of the funnel.
Close the container.
Wipe up any spilled rinsing agent thor-
oughly. This prevents over-foaming during
the next programme.
Alternatively, you can start the Coldpro-
gramme to rinse off any spilled rinsing
agent.
Refill indicator
When the fill level in the rinsing agent con-
tainer is low, you are reminded to change
the canister, e.g.:
Information
Change rinse aid
canister. Empty status
detected.
OK
Confirm the prompt with OK and change
the rinsing agent canister as described.
Fill the dispensing path (see “Machine
functions”)
To Next Page
Loading...
