Machine functions
47
The machine functions menu option is only
visible when external dispensing has been
activated.
The Machine functions menu includes
relevant functions to support daily routine
tasks.
The factory settings are indicated by a
tick. A description of how to configure
settings is provided after the overview.
Menu structure
Further choices
Machine functions
Dispensing systems
*)
Fill dispensing paths
Clean. agent canister
Rinse aid canister
Rinse dispensing paths
Clean. agent canister
Rinse aid canister
*) Only activated dispensing systems are displayed
Dispensing paths
The dispensing systems for liquid media
can only dispense reliably if the dispensing
system has been purged of air and contains
no deposits.
Filling dispensing paths
The dispensing systems need to be topped
up in the following situations:
- If the dispensing system is being used for
the first time.
- If air has been sucked in or the system
has been drained due to a lack of liquid
media.
Before filling the dispensing paths, make
sure that the containers are full and that
the suction lances are screwed securely
to the containers and that they cannot
suck in air.
The menu is saved under the following input
path.
Further choices
Machine functions
Dispensing systems
*)
Fill dispensing paths
*) Only activated dispensing systems are displayed
To Next Page
Loading...
