Milestone Srl MA213-003 – DMA-80 EVO – User Manual
102
5.15.2.2 Observation
Peak- Detection- Distance 1-2: for a proper detection of the peaks, the distance
between peak in cell 1 and peak in cell 2 should be within the range of 13 and 16
seconds.
Check: if activated, the software checks the distance between the peaks during
every measurement. In case of wrong value an error message will be displayed.
Milestone suggests to not activate this function.
Show: If activated, the software shows the value of the distance between T2 and
T1.
To Next Page
Loading...
