Milestone Srl MA213-003 – DMA-80 EVO – User Manual
22
Install the fuse holder into the plug and press it until
the tabs engage
- The below procedure has to be made for DMA-80 EVO units from SN 20032968
Press the two tabs on the sides of the fuse holder of
the plug and take it out
Replace the two fuses from the holder with the ones
suitable for the inlet voltage:
- for 220-240 VAC: 2 x T6,3A
- for 110-120 VAC: 2 x T10A
The spare fuses are in a bag in the blue accessories
case of the unit.
Install the fuse holder into the plug and press it until
the tabs engage
To Next Page
Loading...
