OM-278174 Page 20
F
Complete Parts List is available at www.MillerWelds.com
5-4. Wiring Optional 240 Volt Plug (119172) For Connection To Miller Welder/Generator
With Split-Phase 240 Volt Auxiliary Power
Ref. 120 813-D / 907734
7
Green Or
Green/Yel-
low
2
3
4
5
6
240V
8
8
7
6
5
4
3 (Not Used)
Plug Front
View
1
OM-222 Page 1
allen_wrench
NGO’s
tools/
flathead philips head wrench
pliers
knife
heavy-duty workclamp light-duty workclamp wirecutter frontcutter
allen_set
needlenose
steelbrush nutdriver
chippinghammer
solderiron
stripcrimp
drill
torque wrench
socket wrench
hammer awl file
crimper
paintbrush
feelergauge flashlight ruler
toothbrush
greasegun
qtip (swab)
vicegrip
handream
punch
filterwrench
strapwrench
airgun
solvent pinextractor eprompuller pipewrench
torque screwdriver
cr
escent wrench
OM-222 Page 1
allen_wrench
NGO’s
tools/
flathead philips head wrench
pliers
knife
heavy-duty workclamp light-duty workclamp wirecutter frontcutter
allen_set
needlenose
steelbrush nutdriver
chippinghammer
solderiron
stri
pcrimp
drill
torque wrench
socket wrench
hammer awl file
crimper
paintbrush
feelergauge flashlight ruler
toothbrush
greasegun
qtip (swab)
vicegrip
hand
ream
punch
filterwrench
strapwrench
airgun
solvent pinextractor eprompuller pipewrench
torque screwdriver
crescent wrench
1 Input And Grounding Conductors
2 Plug wired for 240 Volt, 2–wire Load
3 Neutral (Brass) Terminal and Prong (Not
Used)
4 Load 1 (Brass) Terminal and Prong
5 Load 2 (Brass) Terminal and Prong
6 Ground (Brass) Terminal and Prong
7 Black and White Input Conductors
8 Green or Green/Yellow Ground
Conductor
Always connect green or green/
yellow wire to ground terminal,
never to a load terminal. Connect
black (L1) and white (L2) wires to
load terminals.
To Next Page
Loading...
