OM-253 906 Page 12
Disconnect input plug or power before working on machine.
Safe5 2012−05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012−05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012−05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012−05
After taking proper precautions as shown, connect power to unit.
Safe29 2012−05
Do not discard product with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2012−05
Beware of electric shock from wiring.
Safe94 2012−08
Disconnect input plug or power before working on machine.
Safe30 2012−05
Connect Green Or Green/Yellow grounding conductor to ground terminal first.
Connect input conductors (L1, L2, L3) to line terminals.
Safe36 2012−05
Become trained and read the instructions and labels before working on machine.
Safe35 2012−05
Safe57 2012−05
Wear dry insulating gloves. Do not touch electrode (wire) with bare hand. Do not wear wet or damaged gloves.
To Next Page
Loading...
Need help?
General
