Miller PipeWorx 400 User Manual

OM-253 906 Page 65
6-12. Wire Feeder Right Side Active Setup Example (Dual Feeder Only)
. Only illuminated controls can be
changed or adjusted.
1 Right Side Controls Active
2 Pulse Process Selected
3 Trigger Hold On
4 Memory Location 2 Active
4
1
2
3
0
150
252 620-C

Miller PipeWorx 400 Specifications

General

Amperage Range	5 - 400 A
Duty Cycle	60% at 400 A
Processes	MIG, Flux-Cored, Stick, DC TIG, Pulsed MIG
Output Voltage Range	10 - 44 V
Wire Feed Speed	50 - 780 IPM