Milnor E-P Express Reference Manual

Pellerin Milnor Corporation 35
9. End
2.3.5.2 Part B
BNCJUP02.T02 0000191349 A.4 A.8 A.5 1/2/20 1:16 PM Released
1. Abandon operation?
Abandon this operation to retain all current formulas.
• YES: Skip to 1.: step 1, Part C, page 35
• NO: Continue to step 2
2. Select and Confirm Default 10 Formulas
Continue with this procedure to replace formulas 1 through 10 with the standard formulas,
but keep all programmed formulas from 11 through 30.
3. Return to 7.: step 7, Part A., page 34
2.3.5.3 Part C
BNCJUP02.T04 0000191850 A.4 A.8 1/2/20 1:16 PM Released
1. Terminate process
Press the Terminate button to exit this procedure without changing any formulas.
2. Return to 8.: step 8, Part A., page 34
2.3.5.4 Restoring the Standard Formulas on Models Employing the
Milnor
®
E-P Plus
®
and E-P Express
®
Controller
BNCJUP02.T03 0000191347 A.4 A.8 B.3 1/2/20 1:16 PM Released
Display or Action Explanation
PROGRAM 0 MENU
This is Option 0 of the Program menu. From this display, either
return to Run mode or select another menu item.
OK TURN KEY TO RUN
Scrolls available choices (0 through 3) in the Program menu.
PROGRAM 3 MENU
This is Option 3 of the Program menu.
STANDARD FORMULAS
Accesses the Standard Formulas option of the Program menu.
CORRECTIONAL LAUNDRY
Option 0 (Default 30 Formulas) of the Standard Formula menu
effectively deletes all 30 formulas, then replaces formulas 1
through 10 with the factory-supplied standard formulas for the
configured industry. Formulas 11 through 30 are replaced with
blank formulas.
0 DEFAULT 30 FORMULA
CORRECTIONAL LAUNDRY
Option 1 (Default 10 Formulas) deletes only formulas 1 through
10 and replaces them with the factory-supplied standard formulas
1 DEFAULT 10 FORMULA
Programming

Milnor E-P Express Specifications

General

Brand	Milnor
Model	E-P Express
Category	Control Unit
Language	English