Chapter 7 Maintenance
167
2
Select [Station Maint.] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER]
key.
• The carriage moves over the platen.
3
Open the front cover.
• The carriage can be moved by hand. Move the carriage slowly to a position allowing easy
access while working.
4
Remove the media cutter.
5
Clean both sides of the media cutter.
• Wipe off any adhesive paste, ink and dust adhering using a cleaning stick moistened with
industrial alcohol. Wipe off the maintenance liquid. Make sure none remains.
6
Once cleaning is complete, close the cover, then press the [ENTER] key.
7
To Next Page
Loading...
