MIMAKI CJV330-160 - Chapter 4 Cutting Data with Register Marks; Process for Cutting Data with Register Marks

Chapter 4 Cutting Data with Register Marks
106
4.1 Process for Cutting Data with Register
Marks
1.
Create data with register marks.
"Creating Register Marks"(P. 108)
This machine can detect the following three types of register marks:
Mark shape
Type 1 Type 2 Zero margin register mark
2.
Print printing data with register marks.
"Print Process"(P. 50)
3.
Prepare for cutting.
"Cutting Process"(P. 90) (Steps 4 to 8)
4.
Register the information for the printed register marks.
"Setting Mark Detection Conditions"(P. 113)
5.
Detect the register mark origin.
"Detecting the Position of the Register Mark Origin"(P. 114)
Mark shape
Type 1 Type 2