Chapter 1 Before Use
37
1.3 Connecting a PC to the Product
Using a LAN Cable
Connect a PC to this product using a LAN cable. Insert a LAN cable until it engages with a click.
• Do not unplug the cable while data is being transferred.
l
Network Connection Precautions
Make sure the network is set up as follows: Printing is not possible if the network is not set up correctly.
• Use a Category 6 or higher LAN cable.
• The PC used to transfer print data must be located on the same network as this product. This product
cannot be connected via a router.
• Use a 1000BASE-T compatible computer or switching hub. Printing requires 1000BASE-T support.
l
Checking the LAN connection
1
Check the display on this product.
• Local guidance can be used for checking. "Displaying Machine Information (Local
Guidance)"(P. 33) Printing is not possible if "100Mbps", "10Mbps", or "No Connect" is displayed.
Event email can be used. Event Email Function Settings
INFORMATION
LAN Status 1000Mbps
2
Check the lamp on the LAN connector.
• The LAN connector lamp illuminates when this machine is running.
Color Status Outline
Green Illuminated Connected via 1000BASE-T
Off Connected via a network other than 1000BASE-T
• 1,000 Mbps is not supported if only the orange lamp is illuminated or
flashing. Check the specifications for the PC, peripheral devices, and
cable.
Orange Illuminated Linked up (connected).
Flashing Data being received
1
To Next Page
Loading...
