MIMAKI CJV330-160 - Part Names and Functions; Front

Chapter 1 Before Use
24
1.1 Part Names and Functions
Front
1 2
3
5
10
4
6
7
13
12
8
9
11
No. Name Outline
1 Platen Print area. "Platen"(P. 29)
The platen on the JV and CJV is fitted with a heater to prevent ink bleeding.
Adjust the temperature setting to suit the type of media used. "Setting
the Heater Temperature"(P. 75)
2 Pinch roller
Grit rollers
The pinch rollers and grit rollers are used to grip and feed the media.
"Pinch Rollers and Grit Rollers"(P. 28)
3 Cutter unit
* CJV only
Holds a cutter and a pen for cutting. "Cutting"(P. 89) "Cutting Data
with Register Marks"(P. 105)
4 Carriage Consists of a print head, the jam sensor, and the media cutter.
"Carriage"(P. 27)
5 Capping station Includes caps for protecting the print head, cloth wipers, and an NCU for
monitoring print head nozzle conditions. "Capping station"(P. 27)
6 Operating panel Includes operating keys and displays indicating various settings and other
items. "Operating panel"(P. 31)
7 Clamp lever (front) Lowering the clamp lever secures the media. Raising the clamp lever
releases the media.
8 Waste ink tank Contains the container for waste ink. "Waste Ink Tank
Replacement"(P. 192)
9 XY slitter
*JV/CJV only
Cuts the media to the specified size after printing. "Using the XY
Slitter"(P. 117)
Raising the clamp lever secures the media. Lowering the clamp lever
releases the media. "Clamp lever of the XY slitter"(P. 119)
10 Take-up unit Rolls up the printed roll media. "Take-up unit"(P. 58)