MIMAKI CJV330-160 - Media Edge Guide Film Replacement (TS); Media Edge Guide Film Replacement

Chapter 7 Maintenance
190
Media Edge Guide Film Replacement (TS)
Replace the media edge guide film if it is creased or worn.
1
Turn the knob screw and open the edge guide cover.
1
2
2
Rotate the edge guides to remove them.
1
2
3
Remove the media edge guide film from the media edge guide.
• Make sure no parts of the double-sided tape remain.
4
Remove the double-sided tape on the media edge guide film and attach it to the media edge
guide.
• Align and attach the film hole (×2) to the screw hole (×2) of the media edge guide.
/HIWVLGH5LJKWVLGH