MIMAKI CJV330-160 - Chapter 9 Appendix; Specifications (Cutting)

Chapter 9 Appendix
220
9.1 Specifications
Item JV330 Series CJV330 Series TS330-1600
Print
head
Type On-demand piezo head
Specificatio
ns
Two staggered heads with 400 nozzles × 8 rows each
Resolution Y: 600 dpi, 800 dpi, 1,200 dpi
X: 600 dpi, 900 dpi, 1,200 dpi
Y: 300 dpi, 600 dpi
X: 600 dpi, 900 dpi, 1,200
dpi
Ink set 4-color C, M, Y, K (UISS functions on all) BL, M, Y, K (UISS
functions on all)
6-color, W C, M, Y, K, Lc, Lm, W -
8-color C, M, Y, K, Lc, Lm, Lk, Or -
6-color - BL, M, Y, K, Lbl, Lm (UISS
functions only on Y and K)
7-color - BL, M, Y, K, Lbl, Lm, Lk
(UISS functions only on Y)
4-color,
fluorescent
- BL, M, Y, K, FP, FY (UISS
functions only on BL and
M)
6-color,
fluorescent
- BL, M, Y, K, Lbl, Lm, FP,
FY
Media Type Label paper (paper base), PVC sheet (not more than
0.25 mm in thickness, including laminating layer),
fluorescent sheet, reflective sheet, window film,
tarpaulin
• Do not use media with low stiffness like tarpaulin
when using the XY slitter.
Transfer paper
Maximum
printing
width
*1
130 size: 1,360 mm
160 size: 1,610 mm
1,610 mm
Maximum
width
130 size: 1,370 mm
160 size: 1,620 mm
1,620 mm
Minimum
width
210 mm
Thickness Max. 1.0 mm
Roll
external
diameter
*2
Feed unit: Max. 250 mm (paper media), max. 210 mm
(other media)
Take-up unit: Max. 250 mm (paper media), max. 210
mm (other media)
Feed unit: Max. 250 mm
Take-up unit: Max. 250
mm
• 120 to 200 mm when
the edge guide is
attached (depending
on the position of the
edge guide)
Roll
weight
*2, 3
One roll: Max. 45 kg
Three rolls: Max. 90 kg (feed unit only)
Max. 45 kg