Chapter 1 Before Use
27
Ink supply unit
No. Name Outline
1 Ink Eco-case Sets a Ink pack in the Ink eco-case. "Replacing Ink"(P. 44)
2 Ink lever Push down the lever to remove the Ink eco-case.
3 Ink IC chip slot The ink IC chip provided with the Ink pack is inserted here P. 46. This
manages the ink information.
4 Ink leak check tube If ink enters the tube, contact your local dealer or our service office.
Carriage
The carriage includes a print head for ejecting ink, and a jam sensor for stopping the carriage when media
clogs. Printing occurs as ink is ejected while traversing left and right.
Capping station
The capping station includes caps for keeping the print head nozzle surface from drying out, a wiper required
for print head maintenance, and an NCU for monitoring print head nozzle conditions.
1
To Next Page
Loading...
