Chapter 5 Using the XY Slitter
121
Media chute
This is the box for containing the media cut by the XY slitter. Not using the media chute may prevent
consistent discharge, resulting in media jamming and affecting the cut quality.
• There is a risk of media sheets sticking together if the media is folded in half or if the surfaces of
media sheets are left in contact with each other. Take great care when using the XY slitter for
the first time.
l
Capacity (reference)
• Print length not exceeding 600 mm per sheet Up to a total of 30 m
• Be aware of the volume of media in the media chute when using the XY slitter for the first time.
Quality may be affected if the media chute is full.
• Media should be removed from the media chute as frequently as possible.
• The storage capacity varies depending on the media material and cut size.
l
How to use
• Remove both side screws of the media chute and push the front forward.
5
To Next Page
Loading...
