MIMAKI CJV330-160 - Printing Guide (Slit) Line

Chapter 5 Using the XY Slitter
127
5.3 Printing Guide (Slit) Line
The explanation here applies to MIMAKI RIP software (RasterLink).
• The slitting size is 210 mm or more in the Y (scan) direction and 297 mm or more in the X (feed)
direction.
• For more information, refer to the RasterLink reference guide. https://mimaki.com/download/
software.html
• Prepare suitable image data.
• When slitting from the front edge of the media, leave at least 1,000 mm of space from the front
edge to the guide (slit) line.
1
Launch RasterLink.
• Click the icon on the PC desktop.
2
Select the image data to print.
(1) Select [File] > [Open].
(2) Select the desired image data, then click [Open].
• If multiple printers are registered, select 330 series in "Printer Name".
5