Chapter 7 Maintenance
170
Cover (Exterior) Cleaning
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
Blowing Fan Filter Cleaning
Wash the blowing fan filter in water if it is dirty.
l
Recommended cleaning guide
If sublimation transfer ink is used
• Check the filter for dirt every two weeks, and wash.
• Replace the filter every three months. "Blowing Fan Filter Replacement"(P. 181)
• Turn off the main power supply and unplug the power cable before replacing the pinch rollers.
1
Remove the fan filter cover.
• Push the fan filter cover claw outward, and pull the cover to the front.
To Next Page
Loading...
