Chapter 9 Appendix
221
Item JV330 Series CJV330 Series TS330-1600
Core
internal
diameter
*4
2 inches or 3 inches
Printing
face
Exterior/interior Exterior
Roll end Taped or loosely affixed to core
Print
margin
s
Left/right 15 mm (default), minimum: Left/right 5 mm
Top end 70 mm (default), minimum: Left/right 10 mm
Bottom end 70 mm (default), minimum: Left/right 10 mm
Distanc
e
accura
cy
*5
Absolute
accuracy
±0.3 mm or ±0.3 % of specified distance, whichever is greater
Duplicability ±0.2 mm or ±0.1 % of specified distance, whichever is greater
Perpendicularity ±0.25 mm/1,000 mm
Media skew Not more than 2.5 mm/10 m
Printing gap Manual, three settings (2.0, 2.5, 3.0 mm) Manual, three settings
(3.0, 3.5, 4.0 mm)
Clamp pressure Auto switch (three settings) Auto switch (three
settings)
*6
Auto switch (three settings)
Media cutting
Cutting precision (steps): Not more than 1.0 mm
*7
Cutting precision (steps):
Not more than 1.0 mm
Origin alignment LED pointer
Ink supply Ink eco-case
Maintenance liquid
feed
Cartridge
Waste ink tank Bottle type (2,000 ml)
Take-up unit Selectable inside/outside winding
Media heater PRE, PRINT, POST (Independent control) POST
NCU (Nozzle
clogging detection)
Provided
DAS (Automatic
correction function)
Provided
Interior lighting Provided
UV unit N/A
Interfac
e
Data
transfer
function
Ethernet 1000BASE-T
*8, 9
, (USB 2.0 Hi-speed
*9
)
Email
function
Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
Command MRL-V
Languages English, Japanese, Chinese, Turkish, Portuguese, Spanish, Italian, Korean
9
To Next Page
Loading...
