MIMAKI ME-300STII - Part Names and Functions

1-4
Part Names and Functions
No. Name
Indication
in this manual
Function
1 Clamp Table Clamp table The table on which the work is
placed
P. 3 -3
2 Power Off switch Power switch Turns off the power to the machine.P.2-4
3 Power On switch Power switch Turns on the power to the machine. P.2-4
4 Knob to adjust the num-
ber of revolutions of the
spindle
Adjusting knob Adjusts the number of revolutions
(rpm) of the spindle.
P. 2 -7
5 Operation Panel Operation panel The panel for operating the machine P.2-2
6 Emergency Stop Switch EMERGENCY switch Stops the machine in an emergency. P.2-5
7 Chip Removal Attach-
ment
Chip removal attachment Vacuums dust and chips during
engraving.
P. 1 -8
8 Vacuum Hose Vacuum hose The hose which connects the chip
removal attachment to a cleaner
9 Head Head Performs engraving.
A cutter or a pen can be attached.
10 Reference Scale Reference scale Used as reference when setting the
work parallel to the machine.
P. 3 -3