1-6
Choosing the Installation Site
Follow the conditions above to select an installation site.
A guide for the installation space and the maintenance space (unit: mm)
Follow the conditions of an installation site.
Install this machine at the place where meets the following conditions.
If not, this machine may be broken.
• A place where is not exposed to direct sunlight
• A place where the temperature is between 5 and 40 °C
• A place where the humidity is between 35 to 75 % (RH)
• A place where no dust or dirt is entered
• A place where there is no tools or machines generating much oil or waste
• On the flat and even base
• A place where there is enough space for installation and maintenance
Dimensions Installation Space
Maintenance
Space
Width Depth Height Weight A B Width Depth
ME-300STII 540 630 530 50kg or less 1140 1930 2540 2630
ME-500STII 785 750 530 82kg or less 1385 2050 2785 2750
ME-600STII 880 960 530 95kg or less 1480 2260 2880 2960
Installation space :
Shows a minimum required space to
install and operate this machine. Do
not put anything on the installation
space.
Maintenance space :
Shows a required space to replace
parts or repair this machine. Mainte-
nance space needs at least 1 m
around the machine.
A desk, a small rack, or other movable
things as needed are allowed to put in
the maintenance space.
1000mm or more
300mm
or more
300mm
or more
300mm
or more
To Next Page
Loading...
