MIMAKI ME-300STII - Supplied Items; Supplied Items and Optional Items

6-8
Supplied items
Use the supplied items or optional items below.
For supplied items or optional items, contact the shop where you purchased our product or our sales
office.
Supplied items and optional items
Part No. Part Name
Unit of
pack-
age
ME-
300
STII
ME-
500
STII
ME-
650
STII
Remarks / Specifications
SPA-0015 Dust cleaner (large) 1 set ○ ○ ○ Standard accessory
φ26 End Tip transparent plastic
SPA-0016 Dust cleaner (small) 1 set ○ ○ ○ Standard accessory
φ11 End Tip transparent plastic
SPA-0019 Clamp tool 1 set ○ ○ ○
SPA-0021 Engraving Cutter Holder
ST
φ6
1 p ○ ○ ○ Standard accessory
To mount φ6 engraving cutter and
endmill
SPA-0024 Engraving Cutter Holder
ST
φ3
1 p ○ ○ ○ To mount φ3 endmill
SPA-0025 Dust collecting nozzle for
modeling
1 set ○ ○ ○ Brush-type
SPA-0026 Holder for BS Tapered
Shank Cutter
1 p ○ ○ ○ Attachment to mount BS cutter
SPA-0027 Spindle (ST type) 1 p ○ ○ ○
SPA-0032 Cutter holder ST (1/4”) 1 p ○ ○ ○
SPB-0010 Engraving cutter ST( 0.4) 1 p ○ ○ ○ Standard accessory
Blade tip width: 0.4mm, taper: 60°,
Shank
φ6, carbide
SPB-0014 Engraving cutter ST( 0.2) 1 p ○ ○ ○ Blade tip width: 0.2mm, taper: 60°,
Shank
φ6, carbide
SPB-0015 Engraving cutter ST(1.0) 1 p ○ ○ ○ Blade tip width: 1.0mm, taper: 60°,
Shank
φ6, carbide
SPB-0016 Braille cutter ST 1 p ○ ○ ○ Braille forming shank
φ6
SPB-0017 Endmill ST (2.0) 1 p ○ ○ ○ For forming cut out letters
For modeling
Blade tip
φ2.0, high-speed steel,
shank
SPB-0018 Ball endmill ST(2.0) 1 p ○ ○ ○ For modeling
Blade tip R1.0, high-speed steel,
shank
φ6
SPB-0026 Endmill ST(1.0) 1 p ○ ○ ○ For forming cut out letters
For modeling
Blade tip
φ2.0, high-speed steel,
shank
φ6
SPC-0066 Absorbent sheet (300) 1 p ○
SPC-0067 Absorbent sheet (500) 1 p ○
SPC-0068 Absorbent sheet (650) 1 p ○