1-12
How to mount the vacuum hose
Attach the tip of one side of the vacuum hose to the chip removal attachment, and the other side to the
vacuum cleaner.
Fix it on the head with a hose clip.
Use a vacuum cleaner that meets the following conditions.
1. The inside diameter is 32 mm to 38mm.
2. Maximum static pressure
*1
is 2100mm Aq or less.
*2
*1. Indicates on the vacuum cleaner.
*2. Using with the pressure exceeding this value may reduce the flatness follow-up ability or may cause mal-
function.
To Next Page
Loading...
