2-10
No.
Operation Item Description
1 Cut Area Specifies an effective cut area in accordance with the work. P.3-7
2 Condition Sets the cutting speed and moving speed. P.3-14
3
Test Cut Engraves as a trial to check whether the cutting conditions are
appropriate.
P.3-16
4 Data Clear Clears the operation being executed (engraving). P.4-2
5 Single Copy Engraves data in buffer repeatedly. P.4-3
6 View Moves the head to the waiting position (back left). P.4-5
7 Self Test Check a quality of engraving with a pattern. P.4-6
8 Mode Switch Eight types of setting items are available. P.4-7
9 Interface Sets the communication conditions for serial interface (RS-232C). P.4-9
10 Z Standard Sets Z axis reference point automatically. P.3-9
11 G-code There are setting items when a G-code is selected. P.4-9
12
G Work Origin Registers the origin of a work coordinate system available when
G-code is selected.
P. 4 -9
To Next Page
Loading...
