6-10
Machine Specification
Item ME-300STII ME-500STII ME-650STII
X/Y
axis
Engraving Range 310 x 220 mm
(12.4 x 8.8”)
483 × 305 mm
(19.0 x 12.0”)
650 × 440 mm
(25.6 x 17.3”)
Speed When engraving 0.5, 1, 2, 3, 5, 8, 10, 15, 20, 30, 40, 50, 60 mm/s (0.02 - 2.4”/sec)
When moving 20, 40, 60, 80 mm/s (0.8 - 3.1”/sec)
Accelera-
tion
When engraving 0.05 G
When moving 0.3 G
Mechanical Resolution 0.5 μm
Z axis Maximum Stroke 60 mm (2.4”)
Speed When engraving 0.5, 1, 2, 3, 5, 8, 10, 15, 20, 30 mm/s (0.02 - 1.2”/sec)
When moving 5, 10, 15, 20, 25, 30 mm/s (0.2 - 1.2”/sec)
Accelera-
tion
When engraving 0.05 G
When moving 0.3 G
Mechanical Resolution 0.25 μm
Spindle Maximum rotat-
ing speed
14000 rpm
Range of rotat-
ing speed
Stepless adjustment within the range of 7000 to 14000 rpm
Maximum Work Thickness 50 mm
Table Flatness Accuracy 0.2 mm 0.2 mm 0.3 mm
Distance Accuracy ± 0.1 mm / 300 mm
Perpendicularity Less than ± 0.3 mm / 300 mm,
or ± 0.2% of travel distance, whichever is largest
Repetition Accuracy Less than 0.05 mm
Origin Repeatability ± 0.1 mm
Command MGL-IIC3, MGL-IC1
*1
, G code
*2
*1.(a) MGL-IIC3 is the HP-GL and CAM-GLII MODE2 compliant exclusive command.
(b) MGL-IC1 is the GP-GL compliant exclusive command.
*2.G-code is compatible with firmware version 1.40 or later.
Program Step MGL-IIC3 25 μm, 10 μm Switching by the oper-
ation panel
MGL-IC1 50μm, 100μm, 10μm
G code 1 μm, 1.0mm, 0.0001inch, 1.0inch
Maximum Load Capacity of the Table Les than 20 kg (44 lbs)
Receive Buffer Capacity 27 MB
Interface RS-232C, USB2.0
Power-supply Voltage AC 100V - 240V
Power-supply Frequency 50 /60 Hz
Power Consumption 450W or less
Operating Environment 5 to 40 °C
35 to 75 % (Rh) No condensation
Accuracy guarantee range 10 to 25 °C
45 to 65 % (Rh) No condensation
External Dimensions (W) x (D) x (H) 540×630×530mm
(21.6 x 25.2 x 21.2”)
785 x 750 x 530 mm
(30.9 x 30 x 21.2”)
880 x 960 x 530 mm
(34.6 x 38.4 x 21.2”)
Weight 50 kg (110lbs) 80 kg
(176 lbs)
95 kg
(209 lbs)
To Next Page
Loading...
