MIMAKI TS300P-1800 - Specifications; Machine Specifications

Chapter6 Appendix
6-2
Specifications
Machine specifications
Item TS300P-1800
Print head
Method Drop-on-demand piezoelectric print heads
Specification 4-Head Inline
Printing mode (scan x feed) 360×360dpi/ 540×360dpi/ 720×720dpi/ 720×1080dpi/ 720×1440dpi
Usable inks 9 colors (Y,M,Bl,K,LBl,Lm,Lk,FP,FY)
Ink supply
Supplying from ink packs through tubes.
Ink pack replacement type :
Supplying by Toggle switch over with 2 packs/color (4-colors ink set)
Capacity of ink
pack
4-colors Y, M, Bl, K : 2L ink pack 2L-ink pack x 2 for each color
6-colors
Y, K, LBl, Lm : 2L-ink pack x 1 for each color M,Bl : 2L-ink pack x 2 for each color
Y, K, FP, FY : 2L-ink pack x 1 for each color M, Bl : 2L-ink pack x 2 for each color
7-colors Y,K, Bl, LBl, Lm, Lk : 2L-ink pack x 1 for each color M : 2L-ink pack x 2
8-colors Y, M, Bl, K LBl, Lm, FP, FY : 2L ink pack 2L-ink pack x 1
Usable media Duplex paper
Max. printing width 1940mm
Roll Media size
Maximum 1940mm
Minimum 210mm
Thickness 1.0mm or less
Roll outside
diameter
*1
Paper media : Φ250mm or less
Other media : Φ210mm or less
Roll weight
*1, *2
40kg or less
Roll inside diameter 2 or 3 inches
Printing surface Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Leaf media size
Maximum 1950mm
Minimum 210mm
Margin
Leaf media Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Roll media Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Distance accu-
racy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m
Head height adjustment 2 mm to 7 mm, can be freely adjusted manually
Cutting of media Cutting of Y direction by the head cutter. Cutting accuracy (steps) : 0.5 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type ( 2,000 cc)
Interface
Print data transmis-
sion function
USB 2.0, Ethernet 1000BASE-T
Mail function Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
Command MRL- V
Noise
during standby Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m)
during continuous
printing
*3
Less than 65 dB (A)
during discontinu-
ous printing
Less than 70 dB (A)
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Direc-
tive,Machinery Directive, RoHS Directive), CB Report, RoHS